O'Leary Sludds Architects - Medical Device Manufacturing Facilities, Clearstream Technologies Ltd.

Medical Device Manufacturing Facilities, Clearstream Technologies Ltd.

EU cGMP Grade D (ISO 8 Air Cleanliness Classification) Cleanroom environment expansion project to manufacture Balloon Dilatation Catheters for a large multi-national medical device facility in the South East, within an existing medical device facility.

With an in depth knowledge of our clients processes O’Leary Sludds Architects were able to meet all of the clients’ manufacturing requirements and provide the best value engineered solution, while ensuring minimal disruption to building occupants and manufacturing processes during all project phases.

Gowned person with rubber gloves working in cleanroom.
White signage wall with Clearstream logo pin mounted onto wall with brown brick façade and metal canopy.
Gowned person inspecting medical device cleanroom with blue air sock ducting.
Person with rubber gloves inspecting medical device under microscope.
Person in cleanroom gowns holding a medical device up to the light to inspect device.

The project presented a number of challenges due to the existing building constraints and in particular the existing floor to ceiling heights available. These challenges were overcome by an innovative and cost effective approach to the design. In particular the use of an air sock around the perimeter of the room in lieu of more traditional mechanical ductwork.

Close up of medical device clear and blue tubing.
Disabled accessible white laminate reception desk with Clearstream wall signage pin mounted to light grey walls and glass balustrade to staircase.

You've reached the end of this project!

You've reached the end of this project, don't worry though, there's plenty more to see